Application
w w w .xiujun.c o m
Operation terrace; off-shore oil rig; Inspection rack; Stair tread; Ground floor; Trench cover; Bridge sidewalk; foot bridge; Equipment safety fence; Stair landing; Scaffold; filling supporting; Decorating grid; Air grid, etc.Details as follow:
Wastewater Treatment:Cover of trench,Walkways, Drain, Large capacity vessel,Washing machine,Water channel, Ventilation valveStair treads , Flooring Chemical Plant: Stair trends,Wooden platform,Cover of concrete pool,Replacement of metal grating.
Textile Plant: Replacement of metal grating,Wooden platform and cover of concrete pool,Flooring around bleaching,dying area,Floor around pumps and valves area.
Power Plant: Wastewater pool etc..
Metal finishing :Acid washing area,Replacing wooden floor at the surrounding of machines.
Sea food Processing: Oily surface contaminated area,Marine.
Transportation: Platform,Ships,contaminated area,Stair treads.
Beverage Plant :Stair treads,Replacing stainless steel,Floor grating.
Pulp and Paper Works: Stair treads and platform,Walkways,Walkways of wet area.
Meat Processing Works:Floor of easily corrosion area,Ladder,Platform of oily floor and stair treads.
Performance:
Corrosion-resistance, Fire retardant, Light in weight and high in strength, Designable, impact resistance,non-magnetic,Aging-resistance, Safe and anti-skid, many colours,Insulation and non-conductive, stable size,long service life,attractive and maintenance freedom,anti-fatigue,non-sparking,installation easy.
Specification:
Color: green,orange,grey,dark grey,red,blue,etc.Resin: Orthophthalic Polyester, Isophthalic Polyester, Vinyl Ester.
Surface: plain ,Meniscus,Smooth, covered Grit ,Lozenge.
Normal size(length x width x height): 12’x4’x1”, 12’x4’x1.5”,12’x4’x2”, other upon your request.
No.
Panel size (mm)
Width x length x thickness
Lattice size (mm)
Void ratio(%)
Panel weight
(kg)
1
1220x366x25.4
38.1x38.1
69.9
64
2
1220x3660x25.4
25.4x101.6
63.9
73
3
1220x3660x38.1
38.1x38.1
70.0
92
4
1520x3960x38.1
38.1x38.1
70.0
114
5
1220x3660x50.8
50.8x50.8
77.8
101
6
1220x3660x38.1
38.1x152.4
72.6
87
7
579x3048x38.1
38.1x152.4
74.8
34
8
1247x3087x25.0
40x40
72.3
46
9
1009x3007x25.0
25x100
66.7
40
10
1247x3087x40
40x40
72.3
73
11
1247x4047x40
40x40
72.3
96
12
1007x4047x40
40x40
72.3
77
13
1007x4000x30
52x52+19x19
70.0
72
14
1000x4000x50
52x52x+19x19
73.3
108
15
1000x4000x40
50x50+10x10
36.0
107
16
1175x1480x25.4
85x100
83.8
9
Installation Use a heavy-duty rotary saw ,preferably a pneumatic or gas-powered,with a carbide or diamond coated blade,it is easier to cut grating from the smooth side of the panel .Standard Installation Clearance, all grating panels be installed with at 40mm support around all edges,All panels should be attached to supporting surfaces with hold-downsadle clip on 900mm centers.End panel connectors must have support.
Three Standard Stainless Steel Clips:panels should be supported on all sides and attached to the supporting framework with either type M or L clips.A minimum of four clips per side is required for full size panels.Use type C clips to unite the two adjacent panels,where panels cannot be supported on all sides.Clips are sold as set consisting of clip,bolt,nut and washers.
|
|
|
|
|
