Application:
w w w.xiujun.c o m
As a high-tech indoor decorating material fashionable in Europe and America over the past years, the quartz wall-covering has been widely used in hospitals, hotels, airports, office buildings, shopping centers, theaters and resident homes.
Specification:
Performance Comparison – Fiberglass Wall-covering, Normal Wallpaper and Emulsion Paint:
Items Compared
Fiberglass Wall-covering
Normal Wallpaper
Emulsion Paint
Major Composition
Environment-friendly product, made of natural material, no content of PVC, no content of toxic substances of formaldehyde, benzene or toluene
Paper, PVC
Chemical composition of acrylic emulsion
Application Method
Easy-to-reach technical requirement, high working efficiency, convenient adhesive application, strong adhesion of wall-covering with basic layer and coating, easy pattern matching
High requirement for basic layer, pattern matching required, high material consumption
High requirement for basic layer - smooth, dry, oil-free, no loose parts, no cracks
Decorating Performance
Smooth and clear-cut surface, textile structure, bulky and 3-dimentional feeling, free combination of woven pattern, color and gloss for almost ten thousands of decorating results, capable of being painted with pictures. Color changeable by re-coating.
Single feeling of texture, monotonous general impression, liable to cracking, warping, discoloring, yellowing and mildewing
Monotonous color, single and plain feeling of texture, liable to cracking
Flame Retardancy
Excellent, reaching Grade A (GB8624 standard), an incombustible product
Not flame retardant, price increased for flame retardant treatment
Flame retardant, possible releasing of toxic gases
Reparability
Capable of being coated and renovated for several times as well as repaired locally
Irreparable
Capable of being renovated or repaired but the result of reparation unsatisfactory
Stability
No discoloring, no mildewing, nontoxic, odorless, no releasing of harmful substances, mothproof, excellently stable
Liable to discoloring, mildewing and peeling, with odor, poor in moisture resistance, poor stability
Poor in moisture resistance and liable to mildewing
Air Permeability
Good, free breathing through wall surface
Poor, liable to mildewing and discoloring
Poor, liable to mildewing
Wear Resistance
Good
Average
Poor
Impact Resistance
High strength against impact, protecting wall from cracking
Poor
Poor
Acoustical Property
Good, better than normal wallpaper and emulsion paint
Poor
Very poor
Lifetime
Lifetime longer than 15 years, the organic combination of adhesive, quartz fabric and coating to form an integrated part with the wall
Longer than 5 years
3 - 5 years
Economic Efficiency
Convenient application with little loss, capable of being coated for several times, complete in function and excellent in performance, long lifetime and low overall cost
High loss, short lifetime and high overall cost
High efficient application, low overall cost, complicated reapplying
How to use:
1. Smoothing Wall Surface
Clean and smooth wall surface. Fill and smooth all holes or cracks in the wall surface with fillers.
2. Drawing a Vertical Line
The installation of textile quartz wall-covering is usually started from a corner of walls. The width of the textile wall-covering is 1 meter. Draw a vertical line on the wall surface with pencil by means of a plum
3. Applying Adhesive
Rolling apply the special adhesive for quartz wall-covering. The width of each time of rolling application should generally cover about 1.1 meter (i.e. a little wider than the width of the textile quartz wall-covering).
4. Putting Up Wall-covering
Use an adhesive scraper to scrape over the wall surface lightly to make sure that the adhesive is distributed over the wall surface evenly and excessive adhesive is removed at the same time.
5. Trimming Fabric Edges
Put up the textile wallcovering along the vertical lines drawn on the wall surface, making sure to reserve about 3 cm at each of the upper and lower wall corners for later edge trimming. When cutting and splicing are necessary, the two sections of wallcovering should be ensured to have an overlap of about 5 cm. Cutting in the overlapping area can only be made when the overlapped patterns have been checked for matching each other.
6. Applying Coating
Coating should be applied by roller when the adhesive is dried up thoroughly. Two coats of coating material are usually sufficient.
|
|
|
|
|
